www.PETequip.netYour source for used PET processing machinery and other plastic processing and packaging equipment

ITEM # : CIMM004

Machine Make : Krauss Maffei
Model : CAP KM280/1900 C3 sprinter
Year of Manufacture : 2007
Location: Europe
Condition: Very Good
Availability: Immediate

Clamping force : 2.800 kN
Sizes of mould platens : 955 mm x 1,050 mm
Tie-bar-distance : 630 x 630 mm
Min. Mould Thickness : 330 mm
Opening Stroke : 820 mm
Daylight : 1,150 mm
Ejector Force Forward : 110 kN
Ejector Force Backward : 30 kN

Screw Diameter : 60 mm
Injection Pressure : 2,420 bar
Injection volume : 769 cm3
Shot Weight in PS : 700 gm

Voltage: 400 Volt
Frequency : 50Hz
Combination of sockets consisting of-
1 Schuko sockets 16A
1 CEE socket 16A
1 CEE socket 32A
64 zone hot runners controller included

Working hours: 36,000
Machine in excellent condition and well maintained
Clamping cylinders were replaced 500 working hours before decommissioning

Mould Make : KTW, Austria
Hot Runner Make : PSG, Germany
Article Description : PCO1881 closure for CSD in 2.2 gm + Complete Core Section for PCO1881 closure for non-CSD in 2.0 gm
Cycle time of both closures is 4.4 sec
Total number of cycles till decommissioning : 100,000

Please click here to download the closure drawing

www.petequip.net_CAP KM280-1900C3 Sprinter_01

www.petequip.net_CAP KM280-1900C3 Sprinter_02

www.petequip.net_CAP KM280-1900C3 Sprinter_03

www.petequip.net_CAP KM280-1900C3 Sprinter_04

www.petequip.net_CAP KM280-1900C3 Sprinter_05

www.petequip.net_CAP KM280-1900C3 Sprinter_06

www.petequip.net_CAP KM280-1900C3 Sprinter_09

www.petequip.net_CAP KM280-1900C3 Sprinter_10

www.petequip.net_CAP KM280-1900C3 Sprinter_11

www.petequip.net_CAP KM280-1900C3 Sprinter_12

www.petequip.net_CAP KM280-1900C3 Sprinter_13

www.petequip.net_CAP KM280-1900C3 Sprinter_14

www.petequip.net_CAP KM280-1900C3 Sprinter_15

www.petequip.net_CAP KM280-1900C3 Sprinter_17

www.petequip.net_CAP KM280-1900C3 Sprinter_18

© PETequip info@petequip.net